← 拖曳切換角度 →← Drag to switch →
屋頂平鋪型Flat Roof Mount
八字型底座，施工簡便，可直接以自攻螺釘固定於浪板上。A-frame base, simple to install — fixes directly to the roof sheet with self-tapping screws.
依照各種浪板型式採用相對應之底座。A matching base is used for each type of roof sheet.
- 八字型底座，以自攻螺釘直接固定於浪板上，施工簡便A-frame base fixed straight to the roof sheet with self-tapping screws — simple to install
- 依照各種浪板型式採用相對應之底座，緊密貼合浪峰A matching base for each roof-sheet type, fitting tightly over the ribs
- 鎂鋁鋅鋼材（SuperDyma® K35／PosMAC® M35），切割面自我修復防鏽Zn-Al-Mg steel (SuperDyma® K35 / PosMAC® M35) with self-healing cut edges
規格Specifications
依浪板型式選擇對應底座型號。不確定屋頂是哪一型？拍照傳給我們判斷。Choose the base model that matches your roof sheet. Not sure which one you have? Send us a photo.
| 型號Model | 適用浪板Roof sheet | 浪峰高度Rib height | 固定方式Fixing |
|---|---|---|---|
| 015 | 750 型五溝750 type, 5-rib | 24.5 mm (±2) | 自攻螺釘Self-tapping screw |
| 060 | 750 型三溝750 type, 3-rib | 38 mm (±2) | 自攻螺釘Self-tapping screw |
| 069 | 700 型700 type | 69 mm (±2) | 自攻螺釘Self-tapping screw |
檢驗數據Test Results
SGS 拉拔力試驗，試驗速度 20 mm/min。完整報告可來信索取。SGS pull-out tests at 20 mm/min. Full reports on request.
平鋪型（08+15）・木攻釘Flat mount (08+15), wood screw
SGS KR-21-00017
平鋪型（08+15）・自攻釘Flat mount (08+15), self-tapping
SGS KR-21-00019
系統風洞試驗 15 分鐘無損毀System wind tunnel, 15 min — no damage
TÜV Rheinland
屋頂平鋪型實績Flat Roof Mount Projects
其他產品Other Products
屋頂夾具型Roof Clamp Mount
以夾式安裝於浪板上，不傷屋頂浪板設計。Clamps onto the roof sheet — designed not to damage the roof.
滑軌型Rail Mount
底座採滑軌設計，可依需求自由調整間距，適用琉璃鋼瓦或特殊浪板。Sliding-rail base with freely adjustable spacing, for glazed steel tiles and special roof profiles.
棚架型Canopy Structure
結構堅固穩定，具高承載力，適用於較大跨距。Strong, stable structure with high load capacity for larger spans.
常用配件Accessories
因應不同案場提供各式不同配件，未全數列出。A range of accessories for different sites — not all are listed.
需要專案規劃支援嗎？Need help planning your project?
提供案場地點與屋頂型式，我們安排現場勘查並提供報價。Send us your site location and roof type — we will arrange a survey and quote.